Complete Software Guide for Junos
Table 281: Summary of Key OSPF Routing Output Fields (continued)
Field
Adjacency
Related
Documentation
Monitoring RIP Routing Information
Purpose
Action
Meaning
Table 282: Summary of Key RIP Routing Output Fields
Field
Values
RIP Statistics
Protocol Name
The RIP protocol name.
Port number
The port on which RIP is enabled.
Hold down time
The interval during which routes are neither
advertised nor updated.
Global routes
Number of RIP routes learned on the logical
learned
interface.
Global routes held
Number of RIP routes that are not advertised or
down
updated during the hold-down interval.
Global request
Number of requests dropped.
dropped
Global responses
Number of responses dropped.
dropped
1938
®
OS for EX Series Ethernet Switches, Release 10.4
Values
Length of time since the adjacency with the
neighbor was established.
Configuring an OSPF Network (J-Web Procedure) on page 1913
Layer 3 Protocols Supported on EX Series Switches on page 17
Use the monitoring functionality to monitor RIP routing on routing devices.
To view RIP routing information in the J-Web interface, select Monitor > Routing > RIP
Information.
To view RIP routing information in the CLI, enter the following CLI commands:
show rip statistics
show rip neighbor
Table 282 on page 1938 summarizes key output fields in the RIP routing display in the J-Web
interface.
Additional Information
Additional Information
Copyright © 2010, Juniper Networks, Inc.