Show Bgp Neighbor - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show bgp neighbor

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
2304
®
OS for EX Series Ethernet Switches, Release 10.4
show bgp neighbor
<instance instance-name>
<logical-system (all | logical-system-name)>
<neighbor-address>
<orf (detail | neighbor-address)
show bgp neighbor
<instance instance-name>
<neighbor-address>
<orf (neighbor-address | detail)
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
orf
option introduced in Junos OS Release 9.2 for EX Series switches.
orf
Display information about Border Gateway Protocol (BGP) peers.
—Display information about all BGP peers.
none
instance instance-name —(Optional) Display information about BGP peers for only the
specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
neighbor-address —(Optional) Display information for only the BGP peer at the specified
IP address.
orf (detail | neighbor-address)
for all BGP peers or only for the BGP peer at the specified IP address. The default is
to display brief output. Use the
For information about the
the Junos Routing Protocols Configuration Guide.
view
clear bgp neighbor on page 2247
show bgp neighbor (CLNS) on page 2310
show bgp neighbor (Layer 2 VPN) on page 2311
show bgp neighbor (Layer 3 VPN) on page 2313
show bgp neighbor (With Dropped Path Attributes and Ignored Path
Attributes on page 2314
show bgp neighbor neighbor-address on page 2314
show bgp neighbor neighbor-address on page 2315
—(Optional) Perform this operation on all logical
—(Optional) Display outbound route-filtering information
option to display detailed output.
detail
local-address, nlri , hold-time, and preference statements, see
Copyright © 2010, Juniper Networks, Inc.