Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2428

Complete Software Guide for Junos
Table 300: show isis adjacency Output Fields (continued)
Field Name Field Description
Level:
L or Level
—Level 1 only
1
—Level 2 only
2
3 —Level 1 and Level 2
An exclamation point (
is missing an IP address.
State of the adjacency:
State
Remaining hold time of the adjacency.
Hold (secs)
Subnetwork point of attachment (MAC address of the next hop).
SNPA
How long until the adjacency expires, in seconds.
Expires in
Priority to become the designated intermediate system.
Priority
Count of adjacency status changes from
Up/Down
transitions
Time of the last
Last transition
Bit mask of levels on this interface:
Circuit type
=both Level 1 and Level 2 router.
L1/L2
Protocols supported by this neighbor.
Speaks
MAC address of the interface.
MAC address
Supported topologies.
Topologies
Whether a neighbor is capable of graceful restart:
Restart capable
This router has signaled not to advertise this interface to its neighbors in their
Adjacency
label-switched paths (LSPs).
advertisement:
Advertise
This neighbor has signaled not to advertise the interface in the router's outbound
Adjacency
LSPs.
advertisement:
Suppress
IP address of this neighbor.
IP addresses
2324
®
OS for EX Series Ethernet Switches, Release 10.4
) preceding the level number indicates that the adjacency
!
, , ,
Up Down New
transition.
Up/Down
=Level 1 router;
L1
, , or
One-way Initializing Rejected
to or from to
Up Down Down
=Level 2 router;
L2
or .
Yes No
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
. All levels
brief
brief
detail
detail extensive
.
Up detail
detail
detail
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive