Martians - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

martians

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
2086
®
OS for EX Series Ethernet Switches, Release 10.4
martians {
destination-prefix match-type <allow>;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options rib routing-table-name],
[edit routing-options],
[edit routing-options rib routing-table-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure martian addresses.
allow —(Optional) Explicitly allow a subset of a range of addresses that has been
disallowed.
—Destination route you are configuring:
destination-prefix
destination-prefix/prefix-length
address, and
prefix-length
—Default route to use when routing packets do not match a network or host in
default
the routing table. This is equivalent to specifying the IP address
—Criteria that the destination must match:
match-type
exact —Exactly match the route's mask length.
longer —The route's mask length is greater than the specified mask length.
—The route's mask length is equal to or greater than the specified mask length.
orlonger
through destination-prefix
second prefix for the number of bits in the route, and the number of bits in the route is
less than or equal to the number of bits in the second prefix.
upto prefix-length —The route's mask length falls between the two destination prefix
lengths, inclusive.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
— is the network portion of the IP
destination-prefix
is the destination prefix length.
—The route matches the first prefix, the route matches the
.
0.0.0.0/0
Copyright © 2010, Juniper Networks, Inc.