Clear Isis Overload - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

clear isis overload

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear isis overload clear isis overload
Copyright © 2010, Juniper Networks, Inc.
clear isis overload
<instance instance-name>
<logical-system (all | logical-system-name)>
clear isis overload
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Reset the Intermediate System-to-Intermediate System (IS-IS) dynamic overload bit.
This command can appear to not work, continuing to display
The bit is reset only if the root cause is corrected by configuration remotely or locally.
none —Reset the IS-IS dynamic overload bit.
—(Optional) Reset the IS-IS dynamic overload bit for the specified
instance instance-name
routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
clear
show isis database on page 2336
clear isis overload on page 2255
See show isis database for an explanation of output fields.
The following sample output displays IS-IS database information before and after the
clear isis overload command is entered:
user@host> show isis database
IS-IS level 1 link-state database:
LSP ID
pro3-c.00-00
1 LSPs
IS-IS level 2 link-state database:
LSP ID
pro3-c.00-00
pro2-a.00-00
pro2-a.02-00
3 LSPs
user@host> clear isis overload
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
Sequence Checksum Lifetime Attributes
0x4 0x10db 1185 L1 L2 Overload
Sequence Checksum Lifetime Attributes
0x5 0x429f 1185 L1 L2 Overload
0x91e 0x2589 874 L1 L2
0x1 0xcbc 874 L1 L2
after execution.
overload
2255