Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1754

Complete Software Guide for Junos
arp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1650
®
OS for EX Series Ethernet Switches, Release 10.4
Example: Connecting an Access Switch to a Distribution Switch on page 1540
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1568
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1592
Creating a Private VLAN on a Single EX Series Switch (CLI Procedure) on page 1607
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
arp {
aging-timer minutes;
}
[edit system]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Set the time interval between ARP updates.
—Time interval in minutes between ARP updates. In environments
aging-timer minutes
where the number of ARP entries to update is high, increasing the time between
updates can improve system performance.
Range: 5 to 240 minutes
Default: 20 minutes
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
For more information about ARP updates, see the Junos OS System Basics Configuration
Guide.
Copyright © 2010, Juniper Networks, Inc.