Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2384

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 289: show ospf overview Output Fields (continued)
Field name
Field Description
Route table index.
Route table index
Overload capability is enabled. If the overload timer is also configured, display
Configured
the time that remains before it is set to expire. This field is not displayed after
overload
the timer expires.
Number of complete Shortest Path First calculations.
Full SPF runs
Delay before performing consecutive Shortest Path First calculations.
SPF delay
Delay before performing additional Shortest Path First (SPF) calculations after
SPF holddown
the maximum number of consecutive SPF calculations is reached.
Maximum number of Shortest Path First calculations that can be performed in
SPF rapid runs
succession before the holddown timer begins.
LSA refresh time
Refresh period for link-state advertisement (in minutes).
Database
Current state of database protection.
protection state
Warning threshold
Threshold at which a warning message is logged (percentage of maximum LSA
count).
Number of LSAs whose router ID is not equal to the local router ID:
Non self-generated
LSAs
Warning
How long the database has been in the ignore state.
Ignore time
How long the database must stay out of the ignore or isolated state before it
Reset time
returns to normal operations.
Ignore count
Number of times the database has been in the ignore state:
Restart
Graceful restart capability:
Restart duration
Time period for complete reacquisition of OSPF neighbors.
Restart grace
Time period for which the neighbors should consider the restarting routing device
period
as part of the topology.
Helper mode
Graceful restart helper capability:
Trace options
OSPF-specific trace options.
Trace file
Name of the file to receive the output of the tracing operation.
Area
Area number. Area 0.0.0.0 is the backbone area.
2280
®
OS for EX Series Ethernet Switches, Release 10.4
(threshold), and
.
Allowed
enabled
or
enabled
Current
Current
and
disabled
.
or
disabled
.
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
,
All levels
All levels
All levels
Allowed
.
All levels
All levels
All levels
All levels
All levels
extensive
extensive
All levels
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents