Loose-Authentication-Check; Lsp-Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

loose-authentication-check

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

lsp-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
loose-authentication-check;
[edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit protocols isis],
[edit routing-instances routing-instance-name protocols isis]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Allow the use of MD5 authentication without requiring network-wide deployment.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling Authentication for IS-IS Without Network-Wide Deployment
lsp-interval milliseconds;
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the link-state PDU interval time.
—Number of milliseconds between the sending of link-state PDUs. Specifying
milliseconds
a value of 0 blocks all link-state PDU transmission.
Range: 0 through 1000 milliseconds
Default: 100 milliseconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Transmission Frequency for Link-State PDUs on IS-IS Interfaces
Chapter 79: Configuration Statements for Layer 3 Protocols
2083