Layer 3 Protocols Not Supported On Ex Series Switches - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 269: Supported Junos OS Layer 3 Protocol Statements and Features (continued)
Protocol Notes
OSPFv1, v2 and Supported, with the exceptions noted in "Layer 3
v3 Protocols Not Supported on EX Series Switches" on
page 18.
PIM Fully supported on EX3200, EX4200, and EX8200
switches.
RIP Fully supported.
RIPng Fully supported.
SNMP Fully supported.
VRRP Fully supported with exception of IPv6 support of
VRRP on routed VLAN interfaces (RVIs).
Related
Documentation

Layer 3 Protocols Not Supported on EX Series Switches

Table 270: Junos OS Layer 3 Protocol Statements and Features That Are Not Supported
Feature
DVMRP
Flow aggregation (cflowd)
GRE
IPSec
IS-IS:
ES-IS
IPv6 in multicast routing
protocols
Logical routers
1902
®
OS for EX Series Ethernet Switches, Release 10.4
Layer 3 Protocols Not Supported on EX Series Switches on page 18
EX Series Switch Software Features Overview on page 3
EX Series switches do not support the Junos OS Layer 3 protocols and features listed in
Table 21 on page 19:
Configuration Statements Not Supported on EX Series Switches
and subordinate statements
dvmrp
cflow and subordinate statements
Not supported
statements related to IPSec
[edit services]
statement
clns-routing
statement
ipv6-multicast
statement
lsp-interval
statement
label-switched-path
lsp-lifetime statement
statement
te-metric
and subordinate statements
logical-routers
For More Information
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
See the Junos OS Routing Protocols Configuration
Guide.
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Network Management
See the
Configuration Guide.
See "Understanding VRRP on EX Series Switches"
Junos OS High Availability
on page 1172. See also the
Guide.
Copyright © 2010, Juniper Networks, Inc.