Figure 45: Network Topology For Mstp - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 254: Components of the Topology for Configuring MSTP on EX Series Switches
Property
Switch 1
Switch 2
1776
®
OS for EX Series Ethernet Switches, Release 10.4

Figure 45: Network Topology for MSTP

The interfaces shown in Table 254 on page 1776 will be configured for MSTP.
NOTE: You can configure MSTP on logical or physical interfaces. This example
shows MSTP configured on logical interfaces.
Settings
The following ports on Switch 1 are connected in this way:
ge-0/0/9 is connected to Switch 2
is connected to Switch 4
ge-0/0/13
is connected to Switch 3
ge-0/0/11
The following ports on Switch 2 are connected in this way:
ge-0/0/14 is connected to Switch 1
is connected to Switch 3
ge-0/0/18
Copyright © 2010, Juniper Networks, Inc.