FujiFilm SonoSite Edge II Assembly Instructions Manual
Ultrasound diagnostics, triple transducer connect
Hide thumbs
Also See for SonoSite Edge II:
- User manual supplement (310 pages) ,
- User manual (294 pages) ,
- Service manual (96 pages)
Related Manuals for FujiFilm SonoSite Edge II
Summary of Contents for FujiFilm SonoSite Edge II
- Page 1 Triple Transducer Connect (TTC) Assembly Instructions SonoSite Edge II system with TTC installed.
-
Page 2: Unpacking The Box
Unpacking the box Triple Transducer Connect (1) Right-side mounting bracket (1) Left-side mounting bracket (1) Allen-head wrench (1) Allen-head screw (4) -
Page 3: Preparing The Stand
Preparing the stand To lock the stand, press down the lever on two Unlock the system latches. Disconnect the or more wheels. transducer, mini-dock, and any other cables from the ultrasound system, and then remove the system from the stand. Attaching the TTC brackets to the stand head Using the Allen wrench, attach the left-side Insert the screws into the brackets. - Page 4 Tighten the bracket screws. Using the Allen wrench, attach the right- side mounting bracket to the underside of the stand head. Make sure the latch points outward. Rear Inserting the TTC Slide the TTC into the mounting brackets, Insert TTC connector through the bottom and then push to engage the latches on of the stand head.
- Page 5 Connecting the TTC to the ultrasound system Caution To avoid damaging the system, use only peripherals recommended by FUJIFILM SonoSite with the ultrasound system. Insert the TTC connector into the Rotate the latch counterclockwise. ultrasound system. Lower the ultrasound system into the...
- Page 6 Federal (United States) law restricts this device to sale by or on the order of a physician. SonoSite Edge, SonoSite, and the SonoSite logo are trademarks or registered trademarks of FUJIFILM SonoSite, Inc. in various jurisdictions. Value from Innovation is a trademark of FUJIFILM Holdings America Corporation.