I/O Modules Approved For Simotion - Siemens SIMOTION C 230-2 Operating Instructions Manual

2.2

I/O modules approved for SIMOTION

Approved I/O modules
Preferred peripherals for use with SIMOTION C:
• Centralized peripherals:
SIMATIC S7-300 I/O modules
• Distributed I/O systems for PROFIBUS and PROFINET:
– SIMATIC ET 200M (distributed implementation of SIMATIC S7-300 I/O modules):
– SIMATIC ET 200S:
– SIMATIC ET 200eco (only for PROFIBUS):
– SIMATIC ET 200pro
• Other PROFIBUS DP I/O:
– ADI 4 (Analog Drive Interface)
– IM174 (interface module for 4 axes)
In addition to the I/O modules approved for SIMOTION, all certified standard slaves can, in
principle, be connected to SIMOTION if they support the following:
• Cyclic data traffic (DP-V0) and, possibly,
• Acyclic data traffic (DP-V1) or
• Isochronous data traffic (DP-V2)
SIMOTION C
Operating Instructions, 11/2022, A5E33441428B
The modular I/O system for control cabinet installation and high channel density.
The bit-modular I/O system for control cabinet installation including motor starters, safety
technology and individual grouping of load groups.
The compact, economical I/O system in IP 67 degree of protection for machine-level use
without a control cabinet with flexible and fast ECOFAST or M12 connection system.
New modular I/O system in IP65/66/67 degree of protection for machine-level use without
a control cabinet; with new features such as small frame size, integrated PROFIsafe safety
technology, PROFINET connection and hot swapping of modules.
For the connection of drives with analog ±10 V setpoint interface.
For the connection of drives with analog ±10 V setpoint interface, external encoders or
the connection of stepper drives with pulse-direction interface.
Note
Please note that not all modules of the above-mentioned I/O or I/O systems are approved
for SIMOTION. Moreover, system-related functional differences can come into play when
these I/O or I/O systems are used on SIMOTION vs. on SIMATIC. For example, special
process-control functions (e.g. insertion and removal under voltage, etc.) are not
supported by SIMOTION for the SIMATIC ET 200M distributed I/O system.
A detailed, regularly updated list of the I/O modules approved for use with SIMOTION, as
well as notes on their use, can be found on the Internet at:
http://support.automation.siemens.com/WW/view/de/11886029
2.2 I/O modules approved for SIMOTION
Description
25