Operating States Of The Cpu; Overview Of Operating Modes: Startup, Stop, Run - Siemens SIMATIC S7-1500 System Manual

Loading the drive configuration
Requirements
For online functions such as "Download to device", "Upload from device" and "Go online" to
be possible in SINAMICS Integrated, the following requirements must be met:
• The firmware version configured for SINAMICS Integrated corresponds to the firmware
version of the device hardware.
• You have downloaded the hardware configuration to the CPU (see "Loading the CPU
project").
• You must have configured a subnet for the interface to which you are connecting your
programming device.
Procedure
1. To load the drive configuration, select the SINAMICS Integrated in the project tree.
2. In the toolbar, click on the "Download to device" icon.
You can find further information on downloading the drive configuration in the SINAMICS
S120 Startdrive commissioning manual
(https://support.industry.siemens.com/cs/ww/en/view/109781583).
13.4

Operating states of the CPU

13.4.1

Overview of operating modes: Startup, STOP, RUN

Introduction
Operating states describe the state of the CPU. The following operating states are possible
with the mode selector:
• STARTUP
• RUN
• STOP
In these operating states, the CPU can communicate, for example, over the PROFINET IO
interface.
The status LEDs on the front of the SIMATIC Drive Controller indicate the current operating
state.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
Commissioning
13.4 Operating states of the CPU
271