Figure 3-18 Networking Topology After Adding Switch A To Isf - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

Figure 3-18 Networking topology after adding Switch A to ISF

Configuration thought



Configuration steps
Step 1 Configure Switch A.
1.
Raisecom#config
Raisecom(config)#isf renumber 1
Raisecom(config)#isf priority 12
Raisecom(config)#interface tengigabitethernet 1/1/25
Raisecom(config-tengigabitethernet1/1/25)#exit
Raisecom(config)#interface tengigabitethernet 1/1/27
Raisecom(config-tengigabitethernet1/1/27)#exit
Raisecom(config)#interface isf-port 1/1/1
Raisecom(config-isf-port1/1/1)#isf port-group tengigabitethernet 1/1/25
Configure the member ID, member priority, and ISF interface of these four member
devices.
Configure ISF on them. Connect them according to the previous networking topology.
Switch them to ISF mode.
Configure the member ID of Switch A to 1 and member priority to 12.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
3 ISF
188