Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12.7.2 Preparing for configurations
Scenario
Hardware environment monitoring provides environment monitoring for the devices, through
which you can monitor the fault. When device operation environment is abnormal, this
function will record hardware environment monitoring alarm list, generate system log, or send
Trap and other alarms to notify taking corresponding measures and preventing fault.
Prerequisite
Hardware environment monitoring alarm output:
12.7.3 Default configurations of hardware environment monitoring
Default configurations of hardware environment monitoring are as below.
Global hardware environment monitoring alarm Syslog output
Global hardware environment monitoring alarm Trap output
Power down event alarm
Temperature alarm output
High temperature alarm threshold
Low temperature alarm threshold
12.7.4 Enabling global hardware environment monitoring
Enable global hardware environment monitoring for the ISCOM2600G-HI series switch as
below.
1
2
3
In Syslog output mode: alarms will be generated into system logs. To send alarm to the
system log host, configure system log host IP address for the device.
In Trap output mode: configure the management IP address of the device.
Step
Command
Raisecom#config
Raisecom(config)#lo
gging alarm
Raisecom(config)#sn
mp-server alarm-
trap enable
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Function
Enter global configuration mode.
(Optional) enable global hardware environment
monitoring alarm Syslog output.
(Optional) enable global hardware environment
monitoring alarm Trap.
12 System management
Default value
Disable
Disable
Enable Trap output.
Enable Syslog system
log output.
102º C
-40º C
Description
527