Configuring Basic Functions Of 802.1X - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Authentication method
Re-authentication
802.1x re-authentication timer
802.1x quiet timer
Transmission timeout timer
Supplicant authorization timeout timer

10.7.4 Configuring basic functions of 802.1x



Configure basic functions of 802.1x for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
6
7
8
9
802.1x and STP are exclusive on the same interface. You cannot enable them
concurrently.
Only one user authentication request is processed on an interface at a time.
Step
Raisecom#config
Raisecom(config)#dot1x enable
Raisecom(config)#dot1x
authentication-method { chap |
pap | eap }
Raisecom(config)#dot1x auth-mode
{ radius | local | tacacs+ }
Raisecom(config)#dot1x free-ip
ip-address
lenth
]
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#dot1x
enable
Raisecom(config-
gigaethernet1/1/port)#dot1x
auth-control { auto |
authorized-force | unauthorized-
force }
Raisecom(config-
gigaethernet1/1/port)#dot1x
auth-method { portbased |
macbased }
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Function
Command
[ ip-mask | mask-
Default value
Portbased
Disable
3600s
60s
30s
30s
Description
Enter global configuration mode.
Enable global 802.1x.
Configure global authentication
mode.
Configure the mode of 802.1x
authentication.
Configure the IP address segment
available for 802.1x terminal users
who fail to be authenticated or exit
authentication.
Enter physical layer interface
configuration mode.
Enable interface 802.1x.
Configure access control mode on
the interface.
Configure access control mode of
802.1x authentication on the
interface.
10 Security
434