Configuring Load Balancing; Configuring Ospf Network - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

5.7.4 Configuring load balancing

Configure load balancing for the ISCOM2600G-HI series switch as below.
1
2
3

5.7.5 Configuring OSPF network

Configuring OSPF network type
Configure the OSPF network type for the ISCOM2600G-HI series switch as below.
1
2
3
Configuring DR election priority
Configure the DR election priority for the ISCOM2600G-HI series switch as below.
1
2
3
Step Command
Raisecom#config
Raisecom(config)#router
process-id
ospf
router-id
id
Raisecom(config-router-
ospf)#maximum load-
number
balancing
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#ip ospf
network { broadcast | non-
broadcast | ptmp | ptp }
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#ip ospf
priority priority
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enable an OSPF process, and enter OSPF
[ router-
configuration mode.
]
Configure the maximum number of paths
for IP equivalent multi-path load balancing.
Command
Command
Description
Description
Enter global configuration mode.
Enter interface configuration mode.
Configuring the network type of
the Layer 3 interface.
By default, it is the broadcast
network.
Description
Enter global configuration mode.
Enter interface configuration mode.
Configure the DR election priority
on the IP interface.
By default, it is 1.
5 IP services
239