Example For Configuring Cfm - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1
2
3
4
5
6
7
8
9

9.3.13 Example for configuring CFM

Networking requirements
As shown in Figure 9-4, the PC communicates with the server through the network composed
by Switch A, Switch B, and Switch C. You can deploy CFM features on Switch devices to
realize carrier-grade service level, namely, to realize active fault detection, acknowledgement,
and location. Switch A and Switch C are MEPs. Switch B is the MIP, detecting Ethernet fault
from GE 1/1/1 on Switch A to GE 1/1/2 on Switch C. The MD level is 3.
No.
Raisecom#show ethernet cfm
Raisecom#show ethernet cfm domain
level
[ level
Raisecom#show ethernet cfm errors
level
[ level
Raisecom#show ethernet cfm lck
level
[ level
Raisecom#show ethernet cfm local-mp
[ interface
interface-number
Raisecom#show ethernet cfm remote-
mep [ level
Raisecom#show ethernet cfm remote-
mep [ level
service-instance
id ] ] ]
Raisecom#show ethernet cfm
suppress-alarms [ level
Raisecom#show ethernet cfm
traceroute-cache
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
]
]
] [ source ]
interface-type
level
| level
level
] static
level
[ service
[ mpid mep-
level
Description
Show CFM global
configurations.
Show configurations of MD and
service instance.
Show information about the
CCM errors in the database.
Show Ethernet locked signals.
Show configurations of the local
MEP.
]
Show configurations of the
static RMEP.
Show information about RMEP
discovery.
Show configurations of CFM
]
alarm suppression.
Show information about route
discovery of the Traceroute
database.
9 OAM
382