Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Raisecom ISCOM3012GF
Summary of Contents for Raisecom ISCOM3012GF
- Page 1 ISCOM3012GF Hardware Installation User Manual...
- Page 2 Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 Tel: +86-10-82883305 Fax: +86-10-82883056 World Wide Web You can access the most current Raisecom product information on the World Wide Web at the following URL: http://www.raisecom.com Feedback Comments and questions about how the ISCOM3012GF device works are welcomed. Please review...
-
Page 4: Table Of Contents
CONTENTS General Safety Instructions ------------------------------------------------------------------------------ 1 Chapter 1 Overview ------------------------------------------------------------------------------------- 3 1.1 Overview of this manual -----------------------------------------------------------------------------------------------------3 1.2 Terms explanation-------------------------------------------------------------------------------------------------------------3 Chapter 2 Specification and Dimension ---------------------------------------------------------- 4 2.1 Device hardware description -----------------------------------------------------------------------------------------------4 2.2 Device dimension -------------------------------------------------------------------------------------------------------------4 2.3 Device operating environment ---------------------------------------------------------------------------------------------4 Chapter 3 Device Appearance ----------------------------------------------------------------------- 5 3.1 Device front panel description----------------------------------------------------------------------------------------------5... - Page 5 Preface About This Manual This manual is for users of ISCOM3012GF switch with hardware version higher than VER. A.00. Who Should Read This Manual This manual is a reference for device installation and maintenance staff. Relevant Manuals 《ISCOM3012GF Series Switches Commands Notebook》...
-
Page 6: General Safety Instructions
User Manual General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel. - Page 7 User Manual be present inside certain products even when the power switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist.
-
Page 8: Chapter 1 Overview
Chapter 1 Overview 1.1 Overview of this manual This manual mainly discusses the installation of ISCOM3012GF switch. It describes the features of the switch, introduces its components and the functions these components accomplish. The manual brings forth a normative installation procedure for users and explains the types and specifications of all cables applied during the installation. -
Page 9: Chapter 2 Specification And Dimension
Chapter 2 Specification and Dimension 2.1 Device hardware description ISCOM3012GF Ethernet Switch is a layer-3 Ethernet switch designed for network users’ access to the carriers’ network. ISCOM3012GF provides 8 1000BASE-X Ethernet interfaces in the form of SFP and 4 combo interfaces (in support of both 1000BASE-X in the form of SFP and 10/100/1000BASE-T in the form of RJ-45). -
Page 10: Chapter 3 Device Appearance
ISCOM3012GF switch (see the figure below). In the figure shown above: ① The logo and model of the switch are RAISECOM and ISCOM3012GF respectively. ② 3 device status indicators: SYS, PWR1 and PWR2. Indicator... -
Page 11: Device Rear Panel Description
⑥ The CONSOLE interface. 3.2 Device rear panel description ISCOM3012GF’s rear panel is shown in the figure below. In the figure shown above: ① Socket for power supply (Can be socket for 220V AC power supply or -48V DC power supply according to the configuration.) - Page 12 User Manual ③ Device grounding terminal...
-
Page 13: Chapter 4 Installation And Application
4.2 Device installation 4.2.1 Environment requirement There are heat exhaust outlets on both sides of ISCOM3012GF switch. Please leave space on both sides of the switch to keep air flow unblocked. Please make sure the outlets are not blocked. 4.2.2 Install the device on to a rack To set the switch firmly into a rack, please fix the installation tray to the switch using the four screws come with the device and fasten the installation handle on to the rack. - Page 14 The pin number and pin function definition of 9-pin serial port connector is shown in the figure and table below. Function Type Function Type Number Number 3) CONSOLE interface connecting pattern and parameter setup The connecting of ISCOM3012GF CONSOLE interface and PC serial port is shown in the figure...
-
Page 15: Connect To Ethernet
Flow Control: None 4.3.2 Connect to Ethernet ISCOM3012GF switch provides 8 1000BASE-X Ethernet interfaces in the form of SFP and 4 combo interfaces. The auto-adaptation function of all the interfaces is enabled by default. The 4 Ethernet electrical interfaces in the 4 combo interfaces of ISCOM3012GF switch have Auto MDI/MDIX function. -
Page 16: Cable Making
User Manual ISCOM3012GF/DC adopts -48V DC power supply. Please connect the socket on the rear panel of the switch with -48V DC power supply using the provided power supply cable. 4.4 Cable making For the pin numbering of RJ-45 connector and jack, please refer to the “CONSOLE interface signal definitions of the switch”... -
Page 17: Electrify The Switch
User Manual Side 1 Side 1 Side 2 3 5 7 1 = White/Orange 1 = White/Green 2 = Orange 2 = Green 3 = White/Green 3 = White/Orange 4 = Blue 4 = White/Brown 5 = White/Blue 5 = Brown... -
Page 18: Chapter 5 Notes
User Manual Chapter 5 Notes The installation, maintenance, plugging in and pulling out of components of ISCOM3012GF switch can only be conducted by qualified technical support staff. Please place the device in a temperature-controllable and humidity-controllable room and please be cautious of the conductivity of the materials around the device. - Page 19 Address: 2 Floor, South Building of Rainbow Plaza, No.11 Shangdi Information Road, Haidian District, Beijing Postcode: 100085 Tel: +86-10-82883305 Fax: +86-10-82883056 Email: export@raisecom.com http://www.raisecom.com...