Configuring L2Cp Profile; Configuring L2Cp Profile On Interface - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2

2.12.5 Configuring L2CP profile

Configure the L2CP profile for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
6
7

2.12.6 Configuring L2CP profile on interface

Configure the L2CP profile on the interface for the ISCOM2600G-HI series switch as below.
1
2
3
Step Command
Raisecom(config)#l2cp-process
tunnel destination-address
mac-address
Step
Raisecom#config
Raisecom(config)#l2cp-process
profile-number
profile
Raisecom(config-l2cp-profile)#name
string
Raisecom(config-l2cp-
profile)#l2cp-process protocol
{ oam | stp | dot1x | lacp | lldp
| cdp | vtp | pvst |all } action
{ tunnel | drop | peer }
Raisecom(config-l2cp-
profile)#tunnel vlan
Raisecom(config-l2cp-
profile)#tunnel
interface-number
Raisecom(config-l2cp-
profile)#tunnel tunnel-type mac
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#l2cp
profile profile-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
vlan-id
interface-type
Command
Description
(Optional) configure the destination
MAC address for transparently
transmitted packets.
Description
Enter global configuration mode.
Create and enter the L2CP
profile.
(Optional) add profile
description.
(Optional) configure the mode
for processing L2CP packets.
(Optional) configure the
specified VLAN for transparent
transmission.
(Optional) configure the
specified egress interface for
transparent transmission.
(Optional) configure the type of
the tunnel for transparent
transmission.
Description
Enter global configuration mode.
Enter physical interface
configuration mode.
Apply the L2CP profile on the
interface.
2 Ethernet
132