Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
The severity of output information can be manually configured. When you send
information according to the configured severity, you can just send the information
whose severity is less than or equal to that of the configured information. For
example, when the information is configured with the level 3 (or the severity is errors),
the information whose level ranges from 0 to 3, in other words, the severity ranges
from emergencies to errors, can be sent.
12.5.2 Preparing for configurations
Scenario
The ISCOM2600G-HI series switch generates the login successes or failures, key information,
debugging information, and error information to system log, outputs them as log files, and
sends them to the logging host, Console interface, or control console to facilitate checking and
locating faults.
Prerequisite
N/A
12.5.3 Default configurations of system log
Default configurations of system log are as below.
System log
Output log information to Console
Output log information to host
Output log information to file
Output log information to monitor
Output log information to buffer
Log Debug level
Output log information to history list
Log history list size
Transfer log to Trap
Log buffer size
Transmitting rate of system log
Timestamp of system log information
Function
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Default value
Enable
Enable, the default level is information (6).
N/A, the default level is information (6).
Enable, the default level is debugging (7).
Disable, the default level is information (6).
Disable, the default level is information (6).
Low
Disable
1
Disable. The default level is warning (4).
4 Kbytes
No limit
Debug: no timestamp to debug level (7)
Syslog information.
Log: The timestamp to 0–6 levels Syslog
information is absolute time.
12 System management
513
Advertisement
Table of Contents
