Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12.3.7 Configuring LLDP alarm
When the network changes, you need to enable LLDP alarm notification function to send
topology update alarm to the NView NNM system immediately.
Configure the LLDP alarm for the ISCOM2600G-HI series switch as below.
1
2
12.3.8 Configuring TLV
Configure TLV for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
6
12.3.9 Checking configurations
Use the following commands to check configuration results.
1
2
Step
Command
Raisecom#config
Raisecom(config)#lldp
trap-interval
Step
Raisecom#config
Raisecom(config)#interface
interface-number
Raisecom(config-gigaethernet1/1/1)#lldp
tlv-select basic-tlv {all | port-
description | system-capability | system-
name | system-description }
Raisecom(config-gigaethernet1/1/1)#lldp
tlv-select med-tlv {all | capability|
inventory | network-policy| location-id }
Raisecom(config-gigaethernet1/1/1)#lldp
tlv-select dot1-tlv {all | port-vlan-id |
vlan-name }
Raisecom(config-gigaethernet1/1/1)#lldp
tlv-select dot3-tlv { all | link-
aggregation | mac-physic | max-frame-size
| power }
No.
Command
Raisecom#show lldp local
config
Raisecom#show lldp local
system-data [
interface-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
(Optional) configure the period of the timer for
period
sending LLDP alarm Traps.
Command
interface-type
interface-type
]
12 System management
Description
Description
Enter global
configuration mode.
Enter physical layer
interface configuration
mode.
Configure the basic
TLV allowed to issue.
Configure the MED
TLV allowed to issue.
Enable 802.1 TLV type
allowed to issue.
Enable 802.3 TLV type
allowed to be issued.
Description
Show LLDP local configurations.
Show information about the LLDP
local system.
505
Advertisement
Table of Contents
