Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom#1(config)#interface tengigabitethernet 1/1/25
Raisecom#1(config-tengigabitethernet1/1/25)#exit
Raisecom#1(config)#interface isf-port 1/1/1
Raisecom#1(config-isf-port1/1/1)#isf port-group tengigabitethernet 1/1/25
Raisecom#1(config-isf-port1/1/1)#exit
Raisecom#1(config)#isf unit 1 priority 64
Raisecom#1(config)#exit
Save running configurations to the startup configuration file.
Raisecom#1#write
Step 2 Configure Device B.
Configure Switch B to ISF mode.
Raisecom#1#config
Raisecom#1(config)#isf renumber 2
Raisecom#1(config)#isf-mode isf
next unit is: 2, are you sure ? please input 'yes':yes
This config reboot go into effect, Please input 'yes' to reboot:yes
1970-01-01,08:07:17 System-4-SYSTEM_REBOOT:unit1: Change work Mode
reboot !
BOOTROM starting ..
Configure ISF interface 1/1/1, and bind it with physical interface Tengigabitethernet 1/1/25.
Raisecom#2(config)#interface tengigabitethernet 1/1/25
Raisecom#2(config-tengigabitethernet1/1/25)#exit
Raisecom#2(config)#interface isf-port 1/1/1
Raisecom#2(config-isf-port1/1/1)#isf port-group tengigabitethernet 1/1/25
Raisecom#2(config-isf-port1/1/1)#exit
Raisecom#2(config)#isf unit 1 priority 255
Raisecom#2(config)#exit
Save running configurations to the startup configuration file.
Raisecom#1#write
Step 3 Configure switches in ISF mode.
Configure BFD MAD detection.
Configure Switch A.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
3 ISF
183
Advertisement
Table of Contents
