Figure 1-7 Ntp Networking - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

Figure 1-7 NTP networking

Configuration steps
Step 1 Configure Switch A.
Raisecom#hostname SwitchA
SwitchA#config
SwitchA(config)#ntp refclock-master
Step 2 Configure Switch B.
Raisecom#hostname SwitchB
SwitchB#config
SwitchB(config)#ntp server 172.16.0.1
SwitchB(config)#ntp peer 172.16.0.3
Checking results

Use the show ntp status command to view configurations of Switch A.
SwitchA#show ntp status
Clock status
Check Switch A.
:synchronized
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1 Basic configurations
37