Table of Contents
Advertisement
www.raisecom.com
4.1 Before installation
4.1.1 Installation environment
There are heat exhausting inlets at back and on both sides of ISCOM2126EA-MA. To maintain
ambient airflow there must be some space around the two sides or airflow path. The heat exhausting
inlets should not be blocked in case that the airflow can not flow.
4.1.2 Install onto the cabinet
Install the bracket onto the device and then fix the bracket on cabinet by the 4 screws to make the
device as stable as possible.
4.2 Connection of switch
4.2.1 Connect to CONSOLE
ISCOM2126EA-MA provides RS-232 port in form of RJ45 as CONSOLE port. Connect the
CONSOLE port to PC serial port by cable, then configure and control the device through the PC
control platform.
ISCOM2126EA-MA provides RS-232 port in form of RJ45 as CONSOLE port, the pin number of
RJ45 plug and connector are showing as follows:
Signaling and Pinouts of ISCOM2126EA-MA CONSOLE port:
Chapter 4 Installation and Connection
Signal definition of CONSOLE port
RJ45 Connector
Pin number
3
6
4, 5
1 ,2 ,7 ,8
RJ45 Plug
Signal
Type
RxD
In
TxD
Out
GND
N.C
User Manual
5
Advertisement
Table of Contents
