Raisecom ISCOM2600G-HI (A) Series Configuration Manual page 370

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom#config
Raisecom(config)#create vlan 10 active
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#switchport mode trunk
Raisecom(config-gigaethernet1/1/2)#switchport trunk native vlan 10
Raisecom(config-gigaethernet1/1/2)#exit
Raisecom(config)#interface gigaethernet 1/1/3
Raisecom(config-gigaethernet1/1/3)#switchport access vlan 10
Raisecom(config-gigaethernet1/1/3)#exit
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#switchport access vlan 10
Raisecom(config-gigaethernet1/1/1)#exit
Step 2 Enable IGMP Snooping.
Raisecom(config)#igmp snooping
Raisecom(config)#igmp snooping vlan 10
Step 3 Configure IGMP Querier.
Raisecom(config)#igmp querier
Raisecom(config)#igmp source-ip 192.168.1.2
Checking results
Use the following command to show configurations of IGMP Snooping.
Raisecom#show igmp snooping
IGMP snooping
IGMP report-suppression
IGMP version
IGMP snooping active vlan
IGMP aging-time(s)
IGMP ring
Use the following command to show information about IGMP Snooping multicast group
members.
Raisecom#show igmp snooping member vlan 10
R- ring port
Vlan
-------------------------------------------------------------------------
10
D
D - Dynamic
Group
234.5.6.7
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
:Enable
:Disable
:v2
:10
:260
:--
S - Static
Port
GE1/1/1
8 Multicast
Live-time(s) Flag
--
339