Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
You can use the exit or quit command to return to the upper command mode.
You can execute the end command to return to privileged EXEC mode from any
modes but user EXEC mode and privileged EXEC mode.
The ISCOM2600G-HI series switch supports the following command line modes:
Privileged EXEC
Global configuration
Physical layer
interface
configuration
SNMP interface
configuration
Loopback interface
configuration
VLAN configuration
Aggregation group
configuration
Traffic classification
configuration
Traffic policy
configuration
Traffic policy
configuration binding
with traffic
classification
Basic IP ACL
configuration
Extended IP ACL
configuration
Mode
In user EXEC mode, enter the enable
command and correct password.
In privileged EXEC mode, enter the
config terminal command.
In global configuration mode, enter the
interface { gigaethernet |
tengigabitethernet }
unit/slot/interface command.
In global configuration mode, enter the
interface fastethernet 1/0/1
command.
In global configuration mode, enter the
interface loopback lb-number
command.
In global configuration mode, enter the
vlan vlan-id command.
In global configuration mode, enter the
interface port-channel channel-
number command.
In global configuration mode, enter the
class-map class-map-name command.
In global configuration mode, enter the
policy-map policy-map-name
command.
In floe policy configuration mode,
enter the class-map class-map-name
command.
In global configuration mode, enter the
access-list acl-number command. In
this command, acl-number ranges from
1000 to 1999.
In global configuration mode, enter the
access-list acl-number command. In
this command, acl-number ranges from
2000 to 2999.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter method
1 Basic configurations
Description
Raisecom#
Raisecom(config)#
Raisecom(config-
in
gigaethernet1/1/
terface
)#
Raisecom(config-
tengigabitethernet
interface
1/1/
)#
Raisecom(config-
fastethernet1/0/1)
#
Raisecom(config-
loopback)#
Raisecom(config-
vlan)#
Raisecom(config-
port-channel)#
Raisecom(config-
cmap)#
Raisecom(config-
pmap)#
Raisecom(config-
pmap-c)#
Raisecom(config-
acl-ipv4-std)#
Raisecom(config-
acl-ipv4-ext)#
3
Advertisement
Table of Contents
