Raisecom ISCOM2600G-HI (A) Series Configuration Manual page 48

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
New user activation status
New user service type
Enable password
User login authentication mode
Enable login authentication mode
Configure login user management for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
7
8

Besides the default user raisecom, you can create up to 9 local user accounts.

The login password is 8–16 characters, mandatorily including digits, lower-case
letters, and upper-case letters.

A local user with a level lower than 15, unless allowed to execute the command to
modify the login password, is not allowed to modify the login password.
Function
Command
Raisecom#user name
password [ cipher | simple ]
password
Raisecom#user name
privilege-level
privilege
user-name
Raisecom#user
{ allow-exec | disallow-exec }
first-keyword [ second-
keyword ]
user-name
Raisecom#user
service-type { lan-access | ssh
| telnet | web | console |
all }
Raisecom#user login { console |
telnet | ssh | web } { local-
radius | local-user | radius-
local | radius-user | local-
tacacs | tacacs-local | tacacs-
user }
Raisecom#enable password
password
[ cipher
Raisecom#password check
{ complex | simple }
Raisecom#logout
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Activate
N/A
raisecom
local-user
local-user
user-name
Create or modify the user name and
password.
user-name
Configure the login user privilege.
(Optional) configure the priority rule
for login user to perform the command
line.
(Optional) configure the service type
supported by the user.
(Optional) configure the authentication
mode for different user login modes.
(Optional) modify the password for
]
entering privileged EXEC mode. Users
with the level lower than 11 do not
need the password for entering
privileged EXEC mode.
(Optional) configure authentication
mode of privileged users.
Exit the system.
1 Basic configurations
Default value
Description
17