Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Switch2(config-iccp)#member-ip 10.110.3.1
Switch2(config-iccp)#iccp enable
Switch2(config-iccp)#exit
Switch2(config)#mlacp-group 1
Switch2(config-ic-group)#iccp-channel 1
Switch2(config-ic-group)#port-channel 1
Switch2(config-ic-group)#mlacp slave
Switch2(config-ic-group)#restore-mode revertive restore-delay 20
Switch2(config-ic-group)#exit
Checking results
Use the following command to show LACP configurations of the DHD.
DHD#show port-channel 1
Group 1 information:
Mode
MinLinks:
UpLinks :
Member Port
gigaethernet1/1/3
Efficient Port: gigaethernet1/1/1 gigaethernet1/1/2
Use the following command to show mLACP configurations of Switch 1.
Switch1#show mlacp-group 1
mlacp group
System information:
MAC address running
System priority running : 20000
Configuration information:
system mac:
System priority:
Port-channel:
Type:
Iccp-channel:
Iccp-State:
Track PwId:
Pw Ip:
Pw state:
State:
Restore Type:
Restore Time(s):
Use the following command to show mLACP configurations of Switch 2.
:
Lacp
2
4
: gigaethernet1/1/1 gigaethernet1/1/2 gigaethernet1/1/4
: 1
: 000E.5E11.2233
Local information
000E.5E55.0001
20000
1
master
1
connect
0
0.0.0.0
N/A
Active
revertive
20
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Load-sharing mode : src-dst-mac
Max-links
: 2
Priority-Preemptive: Enable
Peer information
000E.5E11.2233
32768
N/A
slave
N/A
N/A
N/A
N/A
N/A
Standby
N/A
N/A
11 Reliability
481
Advertisement
Table of Contents
