Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
1
2
12.3.5 Enabling interface LLDP
Enable interface LLDP for the ISCOM2600G-HI series switch as below.
Step
1
2
3
12.3.6 Configuring basic functions of LLDP
When configuring the delay timer and period timer, the value of the delay timer
should be smaller than or equal to a quarter of the period timer value.
Configure basic functions of LLDP for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
Command
Raisecom#config
Raisecom(config)#lldp
enable
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/1)#lldp enable
Step
Command
Raisecom#config
Raisecom(config)#lldp
message-transmission
period
interval
Raisecom(config)#lldp
message-transmission
delay
period
Raisecom(config)#lldp
message-transmission
hold-multiplier
multiplier
Raisecom(config)#lldp
restart-delay
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enable global LLDP.
Command
Enter global configuration mode.
(Optional) configure the period timer of the
LLDP packet.
(Optional) configure the delay timer of the LLDP
packet.
(Optional) configure the aging coefficient of the
LLDP packet.
hold-
(Optional) restart the timer. When configuring the
period
delay timer and period timer, the value of the
delay timer should be smaller than or equal to a
quarter of the period timer value.
12 System management
Description
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Enable LLDP on an interface.
Description
504
Advertisement
Table of Contents
