Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
3.5.1 Configuring ISF interface
The ISF interface is a logical concept. After you create an ISF interface and bind it with a
physical interface, the physical interface is an ISF physical interface which can be connected
to another device through an ISF connection. An ISF interface can be bound with up to 8
physical interfaces through multiple binding commands. The ISF interface aggregated from
multiple physical interfaces is called the aggregation ISF interface. In this way, up to 16
Ethernet cables or fibers can connect two devices to increase bandwidth and reliability of the
ISF interface.
Configure the ISF interface for the ISCOM2600G-HI series switch as below.
1
2
3
Save the configuration to the startup configuration file so that it can take effect when
the device switches to the ISF mode and load the startup configuration file.
In standalone mode, binding an ISF interface with an ISF physical interface does not
affect current services of the ISF physical interface. When the device switches to ISF
mode, configurations of the ISF physical interface will be restored to the default ISF
status (configurations of current services will be deleted).
When a device leaves the factory, it is in standalone mode without a member ID. You
must configure a member ID and then switch the device from standalone mode to
ISF mode. Use the show isf configuration command to show the member ID. To
avoid conflicts of member IDs upon adding the member to the ISF, you should plan
ISF member IDs.
3.5.2 Configuring member priority
The member priority is used in role election. A device with high priority can be elected as the
master device with high probability.
Configure the member priority for the ISCOM2600G-HI series switch as below.
1
2
Step
Raisecom#config
Raisecom(config)#interface isf-
interface-number
port
Raisecom(config-isf-
port1/1/1)#isf port-group
interface-number
Raisecom(config-isf-
port1/1/1)#exit
Step
Command
Raisecom#config
Raisecom(config)#isf
priority
priority-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
Enter global configuration mode.
Configure the member priority.
Description
Enter global configuration mode.
Create an ISF interface, and enter
ISF interface configuration mode.
Bind a physical interface with the
ISF interface.
Description
3 ISF
166
Advertisement
Table of Contents
