Example For Configuring Isf In Non-Preconfiguration Mode With Bfd Mad - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1970-01-01,08:10:05 System-4-SYSTEM_REBOOT:unit1: Change work Mode
reboot !
Operation successfully
Raisecom(config)#
BOOTROM starting ..
Step 2 Configure switches in ISF mode.
Configure BFD MAD.

Create VLAN 3. Configure the MAD IP address. Enable BFD MAD on Switch A (with the
member ID as 1).
Raisecom#1#config
Raisecom#1(config)#create vlan 3 active
Raisecom#1(config)#interface vlan 3
Raisecom#1(config-vlan3)#mad ip address 192.168.2.1 unit 1
Raisecom#1(config-vlan3)#mad bfd enable
1970-01-01,08:17:21 BFD-5-BFD_SESSIONID_DOWN:unit1: Bfd session 65 is
down.#

Create VLAN 3. Configure the MAD IP address. Enable BFD MAD on Switch B (with the
member ID as 2).
Raisecom#2#config
Raisecom#2(config)#create vlan 3 active
Raisecom#2(config)#interface vlan 3
Raisecom#2(config-vlan3)#mad ip address 192.168.2.2 unit 2
Raisecom#2(config-vlan3)#mad bfd enable
1970-01-01,08:17:21 BFD-5-BFD_SESSIONID_DOWN:unit1: Bfd session 65 is
down.#
3.8.2 Example for configuring ISF in non-preconfiguration mode
with BFD MAD
Networking requirements
When the network grows rapidly, the central switch (Switch A) fails to meet forwarding
requirements. To double forwarding capability based on protecting the existing investment
with easy management and maintenance, you can configure ISF.
Configure Switch A.
Configure Switch B.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
3 ISF
181