Powering On Device; Checking Installation; Figure 4-8 Connecting The Dc Power Connector; Table 4-3 Items To Be Checked After Installation - Raisecom Gazelle S1020i-GL Series User Manual

Raisecom
Gazelle S1020i-GL (A) User Manual

Figure 4-8 Connecting the DC power connector

Step 3 Connect the other end of the DC power cable to the cabinet or the power sourcing equipment
in the machine room.

4.5 Powering on device

Power on the Gazelle S1020i-GL as below:




4.6 Checking installation

Table 4-3 lists items to be checked after installation.

Table 4-3 Items to be checked after installation

No.
1
2
3
The Gazelle S1020i-GL can be powered on after being inserted with the power cable and
installed properly.
The Gazelle S1020i-GL is powered on when the power LED (PWR) is lightening up.
The Gazelle S1020i-GL begins to operate properly after Power-on Self-Test (POST) and
initialization. Interface LEDs indicate the working status of the interface (lit up, off, or
blinking)
Components are installed properly without loose ends or shedding
phenomenon.
Screws are tightened.
Cables are correctly connected without loose ends or shedding
phenomenon.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Item
4 Hardware installation
Method
Check
Check
Check
53