Configuring Mld Snooping - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
1
2
3
4
5
6
7
8

8.8.5 Configuring MLD Snooping

Configure MLD Snooping for the ISCOM2600G-HI series switch as below.
1
2
Command
Raisecom#config
Raisecom(config)#mld mrouter
vlan-id interface-type
vlan
interface-number
Raisecom(config)#mld ring
nterface-type interface-
i
number
Raisecom(config)#interface
i nterface-type interface-
number
Raisecom(config-
gigaethernet1/1/port)#mld
immediate-leave [ vlan
list ]
Raisecom(config)#mld report-
suppression
Raisecom(config)#mld member-
second
timeout {
infinite }
Raisecom(config)#mld version
{ 1 | 2 }
Raisecom(config)#interface
interface-type interface-
number
Raisecom(config-
gigaethernet1/1/port)#mld
snooping host-join
address
vlan
Step
Raisecom#config
Raisecom(config)#mld snooping
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
vlan-
|
group-
vlan-id
Command
Description
Enter global configuration mode.
Create a multicast router interface on the
specified VLAN.
Enable MLD ring network forwarding
on the interface.
(Optional) enable immediate leave of
MLD on the interface or
interface+VLAN.
If immediate leave is disabled on the
downlink interface, the router interface,
after receiving a Leave packet, will
calculate the aging time according to
robust factor and configure the
expiration time for a member to leave
the group as Group Membership Interval
(GMI). GMI = robust-
value*lastmember-queryinterval.
(Optional) enable Report suppression.
When receiving multiple Report packets
from the same group in a specified
period, the ISCOM2600G-HI series
switch forwards only one Report packet
to the router interface while it suppresses
others.
(Optional) configure the aging time of
MLD members.
Configure the MLD version.
Configure the host joining function for
MLD Snooping.
Description
Enter global configuration mode.
Enable global MLD Snooping.
8 Multicast
357