Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Configuring OSPF administrative distance
Configure the OSPF administrative distance for the ISCOM2600G-HI series switch as below.
1
2
3
4
Configuring OSPF to be compatible with RFC1583
Configure OSPF to be compatible with RFC1583 for the ISCOM2600G-HI series switch as
below.
1
2
3
After the routing cost is manually configured through the ip ospf cost command,
the manually-configured routing cost takes effect.
If the routing cost is not configured manually but the link bandwidth reference
value is configured, the routing cost is automatically configured based on link
bandwidth reference value. The formula is: cost = link bandwidth reference value
(bit/s) / link bandwidth. If the cost value is greater than 65535, it is configured to
65535. If no link bandwidth reference value is configured, it is configured to 100
Mbit/s by default.
Step
Command
Raisecom#config
Raisecom(config)#router
ospf
process-id
router-id
id
Raisecom(config-router-
ospf)#distance
administrative-distance
Raisecom(config-router-
ospf)#distance ospf
{ intra-area | inter-area
| external }
Step
Raisecom#config
Raisecom(config)#router ospf
process-id
Raisecom(config-router-
ospf)#compatible rfc1583
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enable an OSPF process and enter OSPF
[ router-
configuration mode.
]
Configure the OSPF administrative
distance.
By default, it is 110.
Configure the administrative distance of
OSPF specified route.
By default, it is 0. However, it takes 110
distance
provided by RM as the standard.
Command
router-id
[ router-id
Description
Description
Enter global configuration mode.
Enable an OSPF process, and
]
enter OSPF configuration mode.
Configure OSPF to be
compatible with RFC1583.
By default, OSPF is compatible
with RFC1583.
5 IP services
238
Advertisement
Table of Contents
