Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
2
3
You can configure the delay threshold and jitter threshold only for the jitter operation.
You can configure the packet loss rate threshold and availability threshold only for the
packet loss rate operation.
9.4.8 Configuring maintenance window
Configure the maintenance window for the ISCOM2600G-HI series switch as below.
Step
1
2
9.4.9 Configuring availability test
Configure the availability test for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
Command
Raisecom(config)#sla
{ loss-rate-threshold | delay-
threshold | jitter-threshold }
{ current | average } [ ds | sd
threshold-value
| two-way ]
Raisecom(config)#sla
availability-threshold
availability
-
threshod
Raisecom(config)#sla
loss-rate-threshold
threshod
Command
Raisecom#config
Raisecom(config)#sla
maintenance{ start | stop }
Command
Raisecom#config
Raisecom(config)#sla
num
availability-num-
consecutive-meas-pdus
Raisecom(config)#sla
num
availability-flr-
threshold
threshold
Raisecom(config)#sla
num
availability-num-
consecutive-intervals
Raisecom(config)#sla
num
availability-num-
consecutive-high-flr
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
oper-num
(Optional) configure the packet loss
rate threshold, delay threshold, or
jitter threshold.
oper-num
(Optional) configure the availability
threshold.
oper-num
(Optional) configure the packet loss
loss-
rate threshold.
Enter global configuration mode.
Start/Stop the maintenance window of
SLA operations.
Enter global configuration mode.
oper-
Configure the number of test packets to be
sent in the SLA availability test period.
number
oper-
Configure the packet loss rate threshold in
the SLA availability test.
oper-
Configure the number of consecutive
indicators in the SLA availability test.
number
oper-
Configure the number of CHLI
consecutive indicators in the SLA
number
availability test.
Description
Description
Description
9 OAM
390
Advertisement
Table of Contents
