Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
3
4
5
12.3.10 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Raisecom(config)#clear lldp statistic
interface-type interface-number
Raisecom(config)#clear lldp remote-table
[
Raisecom(config)#clear lldp global
statistic
12.3.11 Example for configuring LLDP
Networking requirements
As shown in Figure 12-9, the Switch is connected to the NView NNM system; enable LLDP
between Switch A and Switch B, query Layer 2 link change through the NView NNM system.
The neighbor aging, new neighbor and neighbor information changes will be reported as
LLDP alarms to the NView NNM system.
No.
Command
Raisecom#show lldp remote
interface-type interface-
[
number
] [ detail ]
Raisecom#show lldp statistic
interface-type interface-
[
number
]
Raisecom#show lldp tlv-select
[
interface-type interface-
number
]
Command
interface-type interface-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Show information about the LLDP
neighbor.
Show statistics about LLDP packets.
Show information about the optional
TLV sent by the interface.
Clear LLDP statistics.
Clear LLDP neighbor
]
information.
Clear global LLDP statistics.
12 System management
Description
506
Advertisement
Table of Contents
