Example For Configuring Mac Address Table; Figure 2-2 Mac Networking - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom(config)#clear mac-address [
address
Raisecom(config)#clear mac-address{ all |
dynamic | static } [ vlan
type interface-number
Raisecom(config)#clear mac-address blackhole
vlan
Raisecom(config)#search mac-address
{ all | dynamic | static } [
interface-number

2.1.13 Example for configuring MAC address table

Networking requirements
As shown in Figure 2-2, configure Switch A as below:



Figure 2-2 MAC networking

Configuration steps
Step 1 Create VLAN 10, and activate it, and add GE 1/1/2 to VLAN 10.
Raisecom#config
Raisecom(config)#create vlan 10 active
Command
]{ all | dynamic | blackhole | static }
vlan-id
] [ vlan
Configure a static unicast MAC address 0001.0203.0405 on GE 1/1/2 and configure its
VLAN to VLAN 10.
Configure the aging time to 500s.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
mac-
vlan-id interface-
]
mac-address
interface-type
vlan id
- ]
2 Ethernet
Description
Clear MAC addresses.
Clear MAC addresses of
a specified interface.
Clear blackhole MAC
address entries in a
specified VLAN.
Search for a MAC
address.
56