Configuring Static Arp Entries; Configuring Dynamic Arp Entries; Configuring Proxy Arp - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

5.3.4 Configuring static ARP entries



Configure static ARP entries for the ISCOM2600G-HI series switch as below.
Step
1
2

5.3.5 Configuring dynamic ARP entries

Configure dynamic ARP entries for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5

5.3.1 Configuring proxy ARP

Configure proxy ARP for the ISCOM2600G-HI series switch as below.
Step
1
2
3
The IP address in static ARP entry must belong to the IP network segment of
Layer 3 interface on the switch.
The static ARP entry needs to be added and deleted manually.
Command
Raisecom#config
Raisecom(config)#arp
address mac-address
Command
Raisecom#config
Raisecom(config)#arp mode
{ learn-all | learn-reply-
only }
Raisecom(config)#arp aging-
time time
Raisecom(config)#arp max-
learning-num
Raisecom(config)#interface
interface-type interface-
number
Command
Raisecom#config
Raisecom(config)#interface
vlan-id
vlan
Raisecom(config-vlan1)#arp
local-proxy enable
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
ip-
number
Enter global configuration mode.
Enter VLAN interface configuration mode.
Enable local proxy ARP.
Description
Enter global configuration mode.
Configure static ARP entry.
Description
Enter global configuration mode.
Configure the aging time of dynamic
ARP entries.
Configure the aging time of dynamic
ARP entries.
(Optional) configure the maximum
number of dynamic ARP entries allowed
to learn on the Layer 3 interface.
Enter physical layer interface
configuration mode.
Description
5 IP services
214