Preparing For Configurations; Default Configurations Of Watchdog; Configuring Watchdog; Checking Configurations - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

1.10.2 Preparing for configurations

Scenario
By configuring Watchdog, you can prevent the system program from endless loop due to
uncertain fault, thus improving system stability.
Prerequisite
N/A

1.10.3 Default configurations of Watchdog

Default configurations of Watchdog are as below.
Watchdog status

1.10.4 Configuring Watchdog

Configure Watchdog for the ISCOM2600G-HI series switch as below.
Step
1

1.10.5 Checking configurations

Use the following command to check configuration results.
Step
1

1.11 Configuring Banner

1.11.1 Preparing for configurations
Scenario
Banner is a message to display when you log in to or exit the ISCOM2600G-HI series switch,
such as the precautions or disclaimer.
Function
Command
Raisecom#watchdog enable
Command
Raisecom#show watchdog
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Default value
Enable
Enable Watchdog.
Description
Show Watchdog status.
1 Basic configurations
Description
47