Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
3
4
5
2.13.6 Configuring OUI address
Configure the OUI address for the ISCOM2600G-HI series switch as below.
1
2
2.13.7 Checking configurations
Use the following commands check configuration results.
1
2
3
Step
Raisecom(config-
gigaethernet1/1/port)#vioce-
vlan
vlan-id
untagged ]
Raisecom(config-
gigaethernet1/1/port)#vioce-
vlan auto { enable | disable }
Raisecom(config)#vioce-vlan
aging-time
Step
Raisecom#config
Raisecom(config)#voice-vlan
mac-address
address
] [ description
No.
Command
Raisecom#show voice-
vlan mac-address
Raisecom#show voice-
vlan status
Raisecom#show voice-
vlan auto
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
enable [ include-
time
Command
mac-address
mask
[
word
Show the OUI address, its mask, and description.
Show the status of the voice VLAN on the current
device.
Show the automatic mode of the voice VLAN on
the current device.
Description
Enable the voice VLAN.
After the voice VLAN is enabled,
the device in include-untag mode
will add a voice VLAN Tag to
untagged packets of which the
source MAC address matches the
OUI address. When the IP phone
sends untagged voice packets, you
should configure the include-
untagged parameter.
Configure the working mode for the
interface to join the voice VLAN.
Configure the aging time for the
interface to leave the voice VLAN
in automatic mode.
Description
Enter global configuration mode.
Configure the OUI of the voice
VLAN.
]
Description
2 Ethernet
140
Advertisement
Table of Contents
