Configuring Vlan On Trunk Interface - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
4







2.2.7 Configuring VLAN on Trunk interface

Configure the VLAN on the Trunk interface for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
Raisecom(config-
gigaethernet1/1/port)#switchport
access egress-allowed vlan { all |
[ add | remove ]
The interface allows Access VLAN packets to pass regardless of configuration for
VLAN allowed by the Access interface. The forwarded packets do not carry the
VLAN Tag.
When configuring the Access VLAN, the system creates and activates a VLAN
automatically if you have not created and activated a VLAN in advance.
If you delete the Access VLAN manually, the system will automatically configure
the interface Access VLAN as the default VLAN.
When you configure the interface Access VLAN as the non-default Access VLAN,
the default Access VLAN 1 is the VLAN allowed by the Access the egress
interface, you can delete Access VLAN 1 from the allowed VLAN list of the egress
Access interface.
If the configured Access VLAN is not the default VLAN and there is no default
VLAN in the allowed VLAN list of the Access interface, the interface does not
allow packets of the default VLAN to pass.
The allowed VLAN list of the Access interface is effective to static VLANs only,
and ineffective to cluster VLAN, GVRP dynamic VLAN, and so on.
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#switchport
mode trunk
Raisecom(config-
gigaethernet1/1/port)#switchport
trunk native vlan
Raisecom(config-
gigaethernet1/1/port)#switchport
trunk allowed vlan { all | [ add |
vlan-list
remove ]
Raisecom(config-
gigaethernet1/1/port)#switchport
trunk untagged vlan { all | [ add |
vlan-list
remove ]
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
vlan-list
}
Command
vlan-id
}
}
Description
(Optional) configure the VLAN
allowed to pass by the Access
interface.
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure the interface to Trunk
mode.
Configure the Native VLAN of
the interface.
(Optional) configure VLANs
allowed to pass by the Trunk
interface.
(Optional) configure VLANs
from which the Trunk interface
can remove Tag.
2 Ethernet
62