Configuring Sla Scheduling; Configuring Sla Threshold - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide





9.4.6 Configuring SLA scheduling

Configure SLA scheduling for the ISCOM2600G-HI series switch as below.
1
2
3
4
Up to 64 SLA operations can be concurrently scheduled. An operation being
scheduled cannot be modified with basic information nor reconfigured before the
scheduling is stopped. To reconfigure it, wait until the scheduling is stopped (the life
time expires or the scheduling is interrupted).

9.4.7 Configuring SLA threshold

Configure the SLA threshold for the ISCOM2600G-HI series switch as below.
Step
1
After basic information about an operation is configured, the operation cannot be
modified or reconfigured. To modify the operation, delete the operation and then
reconfigure it.
Up to 100 SLA operations can be concurrently scheduled. An operation being
scheduled cannot be modified with basic information nor reconfigured before the
scheduling is stopped. To reconfigure it, wait until the scheduling is stopped (the
life time expires or the scheduling is interrupted).
The private TLV is exclusively used by Raisecom devices. When you pad the SLA
operation with the private TLV, you can configure the SLA operation as required
and schedule it. When you do not pad the SLA operation with the private TLV, you
cannot configure multiple DM or LM operations with the same VLAN, nor
concurrently schedule the operation based on LB packets and these two
operations.
When you choose to pad the SLA operation with the private TLV, this may affect
interoperability with devices of other vendors.
Step Command
Raisecom#config
Raisecom(config)#sla
oper-num
schedule
{ forever |
[ period period
Raisecom(config)#sla
oper-num
schedule
{ forever |
[ period period
Raisecom(config)#exit
Raisecom#write
Command
Raisecom#config
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Configure information about scheduling the
[ life
SLA operation, and enable SLA operation
life-time } ]
scheduling.
]
(Optional) configure automatic loading of
[ life
SLA operation scheduling; in other words,
life-time
} ]
the ISCOM2600G-HI series switch
] begin
automatically enables SLA operation
scheduling upon startup.
Configure and save auto-loading
information.
Description
Description
Enter global configuration mode.
9 OAM
389