Configuring Alarm Indication Signal - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
4
5
6







9.3.8 Configuring alarm indication signal


1
2
3
Command
Raisecom(config)#ether
net cfm traceroute
cache size size
Raisecom(config)#servi
cis-id
ce level
Raisecom(config-
service)#traceroute
{ mac-address
ttl
] [ source
id
] [ size
size
] | mep
[ ttl ttl ] [ source
mep-id ] [ interface-
mode ] [ timeout
second
] [ size
packet-size
Before executing this command, ensure that global CFM is enabled. Otherwise,
the Traceroute operation fails.
If there is no MEP in a service instance, the Traceroute operation will fail because
of failing to find source MEP.
The Traceroute operation will fail if the specified source MEP is invalid. For
example, the specified source MEP does not exist or CFM is disabled on the
interface where the specified source MEP is.
If the Traceroute operation is performed on the specified destination MEP ID, it will
fail when the MAC address of the destination MEP fails to be found according to
the MEP ID.
If CC is disabled, you can configure the static remote MEP and specify the MAC
address to guarantee that the Layer 2 Traceroute operation will proceed normally.
The Traceroute operation will fail if other users are using the specified source
MEP to perform Traceroute operation.
Configuring AIS on the server-layer device
Step Command
Raisecom#config
Raisecom(config)#serv
cis-id
ice
level
Raisecom(config-
service)#service ais
enable
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
(Optional) configure the traceroute cache size.
You can configure the traceroute cache size when
the traceroute cache is enabled.
By default, the traceroute cache size is 100. The
data are not saved when the traceroute cache is
disabled.
Enter service instance configuration mode.
level
Perform Layer 2 Traceroute for locating faults.
By default, the TLV length of a packet is 64. The
[ ttl
ISCOM2600G-HI series switch automatically
mep-
looks for an available source MEP.
packet-
mep -id
] ] }
Enter global configuration mode.
Enter service instance configuration mode.
level
Enable AIS delivery.
By default, this function is disabled.
Description
Description
9 OAM
379