Default Configurations Of Multicast Vlan Copy; Configuring Multicast Vlan Copy; Figure 8-13 Multicast Vlan Copy Networking - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide

Figure 8-13 Multicast VLAN copy networking

Prerequisite
Create VLANs, and add related interfaces to VLANs.

8.7.3 Default configurations of multicast VLAN copy

Default configurations of multicast VLAN copy are as below.
Global multicast VLAN copy status
Interface multicast VLAN copy status
Multicast VLAN and group address set



8.7.4 Configuring multicast VLAN copy

Configure multicast VLAN copy for the ISCOM2600G-HI series switch as below.
Function
To concurrently configure N:1 VLAN mapping and VLAN copy, you must configure
VLAN copy and then configure N:1 VLAN mapping.
To concurrently configure N:1 VLAN mapping and PIM, you must configure PIM
and then configure N:1 VLAN mapping.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Default value
Disable
Disable
N/A
8 Multicast
353