Default Configurations Of Traffic Classification And Traffic Policy; Creating Traffic Class; Configuring Traffic Classification Rules - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Prerequisite
Enable global QoS.

7.5.2 Default configurations of traffic classification and traffic policy

Default configurations of traffic classification and traffic policy are as below.
Traffic policy status
Traffic policy statistics status

7.5.3 Creating traffic class

Create a traffic class for the ISCOM2600G-HI series switch as below.
Step
1
2
3

7.5.4 Configuring traffic classification rules

Configure traffic classification rules for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
Function
Command
Raisecom#config
Raisecom(config)#class-map
class-map-name
[ match-all |
match-any ]
Raisecom(config-
cmap)#description
Command
Raisecom#config
Raisecom(config)#class-map
class-map-name
[ match-all |
match-any ]
Raisecom(config-cmap)#match
access-list{ access-list
name
}
Raisecom(config-cmap)#exit
Raisecom(config-cmap)#match
cos-value
cos
Raisecom(config-cmap)#match
inner-vlan-value
inner-vlan
Raisecom(config-cmap)#match
vlan vlan-value
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Create a traffic class and enter traffic
classification cmap configuration mode.
(Optional) configure the description of
string
traffic class.
Enter global configuration mode.
Create a traffic class and enter traffic
classification cmap configuration mode.
(Optional) configure the traffic
|
classification based on the ACL rule.
The ACL rule must be defined firstly and
the type must be permit.
(Optional) configure the traffic class
based on CoS of packets.
(Optional) configure the traffic class
based on inner VLAN of packets.
(Optional) configure the traffic class
based on VLANs of packets.
Default value
Disable
Disable
Description
Description
7 QoS
303