Checking Configurations; Maintenance - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8

8.2.5 Checking configurations

Use the following commands to check configuration results.
1
2
3
4
5
6

8.2.6 Maintenance

Maintain the ISCOM2600G-HI series switch as below.
Raisecom(config)#clear igmp statistics
[
Raisecom(config)#no igmp member
interface-type interface-number
Step Command
Raisecom(config-
gigaethernet1/1/port)#igmp
immediate-leave vlan
No.
Raisecom#show igmp configuration
Raisecom#show igmp mrouter
Raisecom#show igmp immediate-
interface-type interface-
leave [
number
]
Raisecom#show igmp statistics
interface-type interface-
[
number ]
Raisecom#show igmp snooping
mrouter vlan-priority
Raisecom#show igmp ring
Command
interface-type interface-number
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
vlan-list
Command
]
Description
(Optional) configure immediate leave.
If immediate leave is disabled on the
downlink interface, the router
interface, after receiving a Leave
packet, will calculate the aging time
according to robust factor and
configure the expiration time for a
member to leave the group as Group
Membership Interval (GMI). GMI =
robust-value*lastmember-
queryinterval.
Description
Show IGMP basic configurations.
Show configurations of the
multicast route interface.
Show configuration of immediate
leave on Layer 2 multicast.
Show Layer 2 multicast statistics.
Show the CoS priority of the
IGMP route VLAN.
Show information about the
IGMP ring network.
Description
Clear statistics about Layer 2 multicast
IGMP.
Delete a specified multicast entry.
8 Multicast
329