Checking Configurations; Cpu Monitoring; Introduction - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1
2

12.7.8 Checking configurations

Use the following commands to check configuration results.
1
2
3
4

12.8 CPU monitoring

12.8.1 Introduction

The ISCOM2600G-HI series switch supports CPU monitoring. It can monitor state, CPU
utilization rate, and application of stacking of each task in real time in the system. It helps
locate faults.
CPU monitoring can provide the following functions:

It can be used to view unitization of CPU in each period (5s, 1minute, 10minutes, 2hours).
Total unitization of CPU in each period can be shown dynamically or statically.
Step Command
Raisecom#conf
ig
Raisecom(conf
ig)#clear
alarm
No. Command
Raisecom#show alarm
Raisecom#show alarm
current
Raisecom#show alarm
history
Raisecom#show
environment
[ temperature | power ]
Viewing CPU utilization rate
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Clear alarms manually.
Use this command to clear all alarms in current
alarm list and generate an all-alarm alarm in history
alarm list.
If enabling global sending Trap, the all-alarm alarm
will be output in Trap mode; if enabling global
Syslog, the all-alarm alarm will be output in Syslog
mode.
Show global hardware environment
monitoring alarm configurations.
Show current alarms of hardware environment
monitoring.
Show history alarms of hardware environment
monitoring.
Show information about the current
environment, such as power supply,
temperature, and alarms.
12 System management
Description
Description
529