Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10
11
If 802.1x is disabled in global/interface configuration mode, the interface access
control mode of 802.1x is configured to force interface authorized mode.
10.7.5 Configuring 802.1x re-authentication
Re-authentication is initiated for authorized users. Before enabling re-authentication,
you must ensure that global/interface 802.1x is enabled. Authorized interfaces are
still in this mode during re-authentication. If re-authentication fails, the interfaces are
in unauthorized state.
Configure 802.1x re-authentication for the ISCOM2600G-HI series switch as below.
1
2
3
10.7.6 Configuring 802.1x timers
Configure 802.1x timers for the ISCOM2600G-HI series switch as below.
1
2
3
Step
Raisecom(config-
gigaethernet1/1/port)#dot1x
keepalive { enable | disable }
Raisecom(config-
gigaethernet1/1/port)#dot1x max-
user-number
user
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#dot1x
reauthentication enable
Step
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#dot1x
timer reauth-period
period
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Command
Command
Command
reauth-
Description
Enable or disable 802.1x handshake
on the interface.
Configure the maximum number of
users allowed to be authenticated by
the 802.1x interface.
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Enable 802.1x re-authentication.
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure the time of the re-
authentication timer.
10 Security
435
Advertisement
Table of Contents
