Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6.6.7 Configuring DHCPv6 Relay on VLAN interface
Configure DHCPv6 Relay on the VLAN interface for forwarding packets for the
ISCOM2600G-HI series switch as below.
Step
1
2
3
4
6.6.8 (Optional) configuring DHCP Relay to support Option 82
Configure DHCP Relay to support Option 82 for the ISCOM2600G-HI series switch as below.
Step
1
2
3
4
5
6
6.6.9 Checking configurations
Use the following commands to check configuration results.
No.
1
Command
Raisecom#config
Raisecom(config)#interface
vlan-id
vlan
Raisecom(config-vlan1)#ipv6
dhcp relay
Raisecom(config-vlan1)#ipv6
dhcp relay target-ip
address
vlan-id
[ vlan
Command
Raisecom#config
Raisecom(config)#ip dhcp relay
information option
Raisecom(config)#ip dhcp relay
information policy { drop |
keep | replace }
Raisecom(config)#interface
interface-type interface-
number
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
relay information trusted
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
relay information option vlan-
vlan-list
list
Command
Raisecom#show ip dhcp relay
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Enter global configuration mode.
Enter VLAN interface configuration
mode.
Enable DHCPv6 Relay on the VLAN
interface.
Configure the destination IPv6 address
ip-
for forwarding packets.
]
Enter global configuration mode.
Configure DHCP Relay to support
Option 82. DHCP Relay supports the
Remote ID of Option 82 and is
compatible with Huawei Default mode.
Configure the policy for DHCP Relay to
process Option 82 request packets
Enter physical layer interface
configuration mode.
Configure the trusted interface of DHCP
Relay.
Configure the VLAN list of DHCP
Relay to support Option 82.
Show configurations of DHCP Relay.
Description
Description
Description
6 DHCP
284
Advertisement
Table of Contents
